Degreaser
Description
Degrease ferrous and non-ferrous parts with high level of oil/grease layer with ease. Solvent-based degreaser. So it evaporates post wash.
Application
This product is recommended for:
- Both ferrous and Non-ferrous parts.
- Can remove thick oily film as well as greasy layers.
- Does not need any cloth wipe post degreasing. Do not dilute with water.
Properties
- High degreasing power for geometrically complex parts.
- Forms an almost imperceptible thin protective film able to affix stabilizing auto-repairable anti-corrosive surfaces.
- Advanced VCI monomolecular layer formation post degreasing stops flash rusting till preservation application.
Features & Benefits
- Gives a fine layer of protection while / after degreasing.
- No residue will remain after degreasing due to solvent based degreaser formulation; hence it dries fully.
- No drying required post wash.
Degreaser In Singapore
Directions for use
- Apply the degreaser by brush, spray or immersion/dip to all the areas required.
- Atomization spray may not be required for the solvent based Dev VCI OD53.
- Apply the corrosion prevention immediately without any delay, even though the degreaser will take of flash rusting for short duration.
- Do not dilute, use the degreaser as supplied.
Handling, Storage & Packaging
- Dev VCI OD53 is volatile solution.
- If it gets in contact with eyes, wash with plenty of water.
- Available in 20L carboy/200L barrel.
Physical & Chemical Data
| Film Type | monomolecular |
| Color | Colorless |
| COC inflamation point | >70degC/158F |
| Density at 20°C | 0.820 g/cm3 |
Application
This product is for
- Removing process dirt and fluids with temperatures of up to 60°C .
- Degreasing with anti-corrosive protection for ferrous and nonferrous materials, equipment stored indoors.
- Dev VCI WD23 is specially designed for high pressure wash in machines, works good in even greater than 10 bars pressure without formation of foam. Removing process dirt & fluids.
- Dev VCI WD25 is designed to degrease machining processes with mineral oil and water-soluble fluids and degreasing with corrosion protection for ferrous and nonferrous metals.
Properties
- Excellent degreasing power.
- Good separation of “tramp oil”. Non-aggressive to skin.
- Forms an almost unnoticeable thin protective film able to affix stabilizing auto repairable anti corrosive surface.
- Advanced VCI monomolecular layer formation post degreasing stops flash rusting till preservation application.
Description
Water based degreaser with anticorrosion protection for metals and protecting parts and equipment. Product recommended ferrous and nonferrous metals like aluminum, yellow metals and their alloys, made of
organic raw materials with Advanced VCI.
Directions for use
- Dev VCI WD20 / 23 / 25 shall be mixed with water at % based on application as shown in the tabulation.
- Apply degreaser by brush, spray or dip to all the areas required
- Dev VCI WD20 is water-based degreaser, Dev VCI OD53 is solvent based degreaser. Both shall not be mixed.
Storage & Packages
- Do not reuse empty containers.
- Available in 20L carboy cans or 200L barrels.
Physical & Chemical Data
| Film Type | monomolecular |
| idel Working Temperature | Upto 60°c |
| immersion | Colorless |
| spraying | min of 5% |
| Color | Yellow |
| Physical State | liquid |
| Density at 20°C | 1.030 g/cm3 |