Indoor/Outdoor

Sprayable oil-based, thixotropic, anti-corrosive product that forms a stable film on treated surfaces.

This product is recommended for:

• Protecting ferrous and non-ferrous parts stored indoors for 3 years.
• Suitable for products to be exported.

• Forms a thixotropic protective film.
• Excellent water-repellent capacity.
• High protection power for equipment and parts.
• Forms an almost unnoticeable thin protective film able to affix stabilizing auto-repairable anti-corrosive surface.

• Dev VCI O-Shield 82 is an oil based anti-corrosive product that forms a stable film on treated surfaces.

• Spray or brush apply Dev VCI O-Shield 82 to cover the bare metal surfaces.
• Allow the Dev VCI O-Shield 82 to dry.
• When it is drying, keep away from contaminating with water & dust on the applied rust preventers.

• Store away from heat, flame or sparks.
• Do not reuse empty containers.
• Available in Aerosol cans, 20L jerry can or 200L barrels. Dev VCI O-Shield 82S is named for Aerosol Spray cans .
• Aerosol Spray cans are available under the name Dev VCI O-Shield 82S.

Oil-based, thixotropic, anti-corrosive product that forms a stable film on treated surfaces. Good lubricating fluid.

This product is recommended for:

• Steel cables: Protection of ferrous & non-ferrous parts in onshore environment or near the sea.
• Also suitable for external surfaces where we need full transparent coat with non-drying layer allowed.

• Forms a thixotropic protective film.
• Excellent water-repellent capacity.
• High protection power for equipment and parts.
• Forms an almost unnoticeable thin protective film able to affix stabilizing auto-repairable anti-corrosive surface.

• Dev VCI O-Shield 87 is an oil based anti-corrosive product that forms a stable film on treated surfaces.

• Dev VCI Water Guard+ is used as an additive, 100% concentrated.
• It is added as 2% of the volume of content.

• Do not reuse empty containers.
• Available in Aerosol cans, 20L carboy cans or 200Lbarrels. Dev VCI O-Shield 87S is description for spray can.

Spray able oil-based, thixotropic, anti-corrosive product that forms a stable film on treated surfaces. Good lubricating fluid.

This product is recommended for:

• Steel cables: Protection of ferrous & non-ferrous parts in onshore environment or near the sea.
• Also suitable for external surfaces where we need full transparent coat with non-drying layer allowed.

• Forms a thixotropic protective film.
• Excellent water-repellent capacity.
• High protection power for equipment and parts.
• Forms an almost unnoticeable thin protective film able to affix stabilizing auto-repairable anti-corrosive surface.

• Dev VCI O-Shield 87S is an oil based anti-corrosive product that forms a stable film on treated surfaces.

• Dev VCI Water Guard+ is used as an additive, 100% concentrated.
• It is added as 2% of the volume of content.

• Do not reuse empty containers.
• Available in Aerosol cans, 20L carboy cans or 200Lbarrels. Dev VCI O-Shield 87S is description for spray can.

Suitable for wrap Gauges/instruments packaging. Protection against damage , corrosion of ferrous and non-ferrous metal parts/gauges in the storage ,shipment processes.

• VCI CONTENT: Active VCI compound applied on PEBD resin. It can be co-extruded in different thicknesses and PE resin mixtures.
• Non-toxic VCI “Volatile Corrosion Inhibitor” TOXICITY level as low as: LD50 orally > 2000 mg/kg. Material completely free of nitrites, nitrates, chromates, sulfates and heavy metals.

• Practically recyclable product, totally biodegradable and recyclable.
• This product is derived from non-aromatic amines which are not included in the list of carcinogen amines.
• Product composed of 100% resin mixtures of Low Density Linear Polyethylene resins, without the addition of other chemical.

• Film should be wrapped completely around the instruments/item to be protected against corrosion with air pocketed mechanical cushions.
• Make sure all previously applied preservative coating is dried, cover 100% of the bare metal.

• Store away from heat, flame or sparks.
• Available in 70 g/m2, 1.3 meters width in 1kg rolls.
• Bubble film available in white, blue colour or which can be co-extruded into different colour as required.

Wax based anti-corrosive product that forms a stable film on treated surfaces.

This product is recommended for:

• Protecting ferrous and non-ferrous parts stored in and outdoors, and parts with complex geometric shapes.

• Forms a thixotropic protective film.
• When applied, Dev VCI O-Shield 80 dries like a paint, solvent evaporates and becomes wax like coating.
• High protection power for equipment and parts.
• Forms an almost unnoticeable thin protective film able to affix stabilizing auto-repairable anti-corrosive surface.

• Physical and chemical barrier with film waxy film, high protection of equipment and machined parts.

• Brush, roller, spray and immersion.
• Rate of application of Dev VCI O-Shield 80 is 1 Lit. per 8M2.
• Apply Dev VCI O-Shield 80 to cover the entire surfaces of bare metal exposed and completely to be protected. Allow the Dev VCI O-Shield 80 to dry and form a protective layer
• In case of any rain, close the applied area and protect from water wash of the applied rust preventers till drying.

• Store away from heat, flame or sparks.
• Do not reuse empty containers.
• Spray cans are named as Dev VCI O-Shield 80S.
• Available in aerosol cans, 20L carboy cans or 200L barrels.

Wax based anti-corrosive product that forms a stable film on treated surfaces.

This product is recommended for:

• Protecting ferrous and non-ferrous parts stored in and outdoors, and parts with complex geometric shapes.

• Forms a thixotropic protective film.
• When applied, Dev VCI O-Shield 80 dries like a paint, solvent evaporates and becomes wax like coating.
• High protection power for equipment and parts.
• Forms an almost unnoticeable thin protective film able to affix stabilizing auto-repairable anti-corrosive surface.

• Physical and chemical barrier with waxy film, high protection of equipment and machined parts.

• Brush, roller, spray and immersion.
• Rate of application of Dev VCI O-Shield 80 is 1 Lit. per 8M2.
• Apply Dev VCI O-Shield 80 to cover the entire surface of bare metal exposed and to be protected completely. Allow the Dev VCI O-Shield 80 to dry and form a protective layer.
• In case of any rain, close the applied area and protect from water wash of the applied rust preventers till drying.

• Store away from heat, flame or sparks.
• Do not reuse empty containers.
• Spray cans are named as Dev VCI O-Shield 80S.
• Available in aerosol cans, 20L carboy cans or 200L barrels.

Self-adhesive flange protection meant for closure of flange holes, protect contact surfaces from damage. Can be easily used for closing of internal preservation.

This product is recommended for:

• Residue free removal, no clean-up required.
• Safe for Stainless Steel and speciality metals.

• Flange Dots contains self-adhesive glue peel able cover for quick application/usage.
• It Saves time in precision cutting, exact fit to trim, and avoiding of knife usage & preparation time.

• Practically recyclable product, totally biodegradable and recyclable.
• Simple, faster installation, 87% faster than conventional methods.
• Precision cut for exact fit, no trimming, no knife usage.
• Holds up against aggressive shot blast. Consistent professional looking blast & paint edges.
• Act as pink mask even with most heat cured coatings, works for indoor /outdoor preservation.
• Protect interiors of the pipe from unwanted debris.

• Put the flange dot on the pipe end faces.
• It will adhere to the raised face because of the existing glue and form the seal.

• Store away from heat, flame or sparks.