VCI In Singapore | Preservemetals

Dev VCI Oxy coat is a revolutionary mixture of Oil-based paint and VCI.
The coating gives dry cured protection of metal surfaces which can be kept outdoors.
Paint spray or brush or roll.
It cures by oxidation.
Low content of volatile organics.

Dev VCI Eco Coat is a water-based corrosion resistance coat.
It is a mixture of water based paint and VCI.
It forms a dry cured coat for protection of metal surfaces which can be kept outdoors.
Dev VCI Eco glossy paint can be applied on the eco coat after curing to get more glossy finish.
No VOC content.
Ecology/environmental friendly.

Dev VCI FC Coat is a revolutionary mixture of wax based VCI and paint which can cure faster than VCI and forms dry cured coat for protection of metal surfaces which can be kept outdoors.
Paint spray or brush or roll.
Cures faster than VCI.
Superior adhesion is possible with good preparation of substrate.
It can be directly applied on bare metals temporarily for few years of preservation viz. raw procured sheets, pipes,etc.

The principle of PU Coating is single pack polyurethane, moisture curing coating. No mixing, no control due to waiting time and pot life. It is categorized into two major categories.
PU Coat for Normal Atmospheric Temperature.
PU Coat for Sub-Zero Temperature usage surfaces.
Dev PU Coat can withstand higher bending stress from cracking. Traditional epoxy paints will crack at high stress areas, casing repetitive paint failure at the same high stress location. With the use of Dev PU Coat, repetitive repair and reworks can be avoided.

OXY/ECO/FC/PU COAT